Aleks_vl
Member
VIP Member
- 21 Dec 2020
- #1
Hi everyone, I took the last bus that was in stock, but none of them had cruise control, but I can't, because mostly goes on the highway and I decided to retrofit the bus with cruise control, and at the same time with the Front Assist system, all I need is ordered and bought, and then I ran into a problem I can't find the connection diagram of the radar sensor (Front Assist) on the T6.1, T6 I have, but they say it does not fit. So here is the crux of the issue there is someone this scheme, share, please.
dnoermann
Senior Modder in Germany
VCDS User
T6 Guru
- 21 Dec 2020
- #2
The T6.1 is based on MQB Plattform.
There everything is different than T6 wich was PQ25.
In MQB most of the Features need Software enablement with Cryptographically safe Codes.
And the wiring i dont have, too.
Last time i looked in Elsa online it was not available.
Aleks_vl
Member
VIP Member
- 21 Dec 2020
- #3
I know about the encoding, the official dealer promised to prescribe it to me, but refuses to install it, in fact, everything is just on the wires of the Kan bus and power, but where and in what block this is the whole snag, the dealer asked for a printout of the scheme they refuse to say it is forbidden to disclose information)))
mmi
Senior Expert
VCDS User
Moderator
VIP Member
T6 Legend
- 22 Dec 2020
- #4
Not exactly the ACC - only the regular one.
T6.1 Retrofit cruise-control
Today I fix my cruisecontrol original in VW T6.1 2.0 (CXGD) It was not easy job, wiring Gateway soft... but it is working!! yes I dit it first T6,1 in Europe with retrofit original cruisecontrol! I,am happy!
www.t6forum.com
Aleks_vl
Member
VIP Member
- 22 Dec 2020
- #5
mmi said:
Not exactly the ACC - only the regular one.
T6.1 Retrofit cruise-control
Today I fix my cruisecontrol original in VW T6.1 2.0 (CXGD) It was not easy job, wiring Gateway soft... but it is working!! yes I dit it first T6,1 in Europe with retrofit original cruisecontrol! I,am happy!
www.t6forum.com
Thanks I've already seen it, there's no specifics, just water.
Robert
Senior Modder
VCDS User
Moderator
VIP Member
T6 Legend
- 6 Jan 2021
- #6
Kufatec does ACC (supply only) on T6.1 for €999 = £905
Product information "Adaptive Cruise Control (ACC) for VW T6 SH"
- Complete set for retrofitting an automatic cruise control (ACC) incl. City Emergency Braking for VW T6 SH
- By a radar sensor in the front bumper, the system controls both the speed and the distance to the vehicle ahead
- Adjustable speed up to 210 km/h (for manual transmission from the 2nd gear)
- Stop & go function (only with automatic transmission)
- Increase of the riding comfort in heavy traffic and long highway trips
- The City Emergency Braking are able to warn of impending collisions
- Display of distance and control range in the speedometer
- Selection of the distance via the multifunction steering wheel (if installed) or via the separate steering column lever on the left side
Scope of delivery:
- depending on the chassis number
Notes:
- The article will only be shipped by prior arrangement
- For vehicles with automatic transmission (PR-No.: G1C,G1D) the ABS control unit must be replaced. We would be pleased to submit you an offer.
- Check the compatibility of the Can Gateway and replace it with the Highline version if necessary
| Product group: | Assistance systems |
| Coding: | Full coding dongle |
| Product type: | Complete kit |
| Weight (in kg): | 1.3 |
| Installation time (in h): | 4 |
| EAN: | 4250363344082 |
Link below:
KUFATEC
By a radar sensor in the front bumper, the system controls both the speed and the distance to the vehicle ahead
www.kufatec.com
Aleks_vl
Member
VIP Member
- 9 Jan 2021
- #7
Thank you, I have already written off with them, since I already bought a kit for installation, I only need a Full coding dongle, and they say we do not sell separately. Unfortunately, this is not my option.
Petro
Pure grey T6.1 Transporter 4Motion 150hp
T6 Guru
- 13 Feb 2021
- #8
Aleks_vl said:
Thank you, I have already written off with them, since I already bought a kit for installation, I only need a Full coding dongle, and they say we do not sell separately. Unfortunately, this is not my option.
Have you got it to work yet? Im also interested in this.
Aleks_vl
Member
VIP Member
- 15 Feb 2021
- #9
No yet, everything is bought waiting for heat, but maybe the price for encoding will be a little less, but for now it is very expensive 500 euros only for adaptation.
Last edited:
Robert
Senior Modder
VCDS User
Moderator
VIP Member
T6 Legend
- 15 Feb 2021
- #10
Whose price is that?
Aleks_vl
Member
VIP Member
- 15 Feb 2021
- #11
This is in Russia, in Germany, Kufatec generally refused if you do not buy spare parts from them.
They reminded me about the cruise, and again I got a chill in one place and decided to call to find out how things are going today. That's what you had to prove! Now I called to find out the price for today (500 euros is the price for December), said that I have all the equipment installed on the bus and only need to connect programmatically. The price was announced 200 euros, I'm shocked, the price tag fell more than 2 times, then I asked will this be done with the substitution of the vin number?, no, they say it was generated with reference to my vin number and when updating the car's firmware, nothing will fly off from the official dealer, they give a guarantee.
Result:Everyone speaks so beautifully that you just want to believe, jump into the bus and rush to them immediately.
Y
yrm0526
New Member
- 29 Jul 2023
- #12
Aleks_vl said:
No yet, everything is bought waiting for heat, but maybe the price for encoding will be a little less, but for now it is very expensive 500 euros only for adaptation.View attachment 103769
Hi do you have the part number? Thanks
You must log in or register to reply here.
